- Wire hook end fitting: Efficiently anchor your gear with heavy-duty zinc-chromate steel hooks.
- Wide ratcheting handle: Tighten the strap and secure your load with ease and speed.
- High-level safety: Straps meet DOT regulations and WSTDA-recommended standards.
| Width | 2 in |
| Material | Polyester |
| Metal Parts | Zinc Chromate |
| WLL (lb.) | 3333 |
| ABS (lb.) | 10000 |
| Webbing Break Strength (lb.) | 12000 |
| Strap Type | Ratchet |
| End Fitting | Wire Hook (Double J) |
| Length | 27 ft |
| Color | Yellow |
| Quantity | 2 |
Durable and Versatile
With a working load limit of 1,500 lb and a capacity of 4,500 lb, these 2 in wire hook ratchet straps are brawny beasts. Both the wire hooks (otherwise known as double J-hooks) and the ratchet handle are crafted with zinc-chromate steel to prevent rusting or corrosion under any weather condition. Wire hook endings are the choice option for easier attachment and asymmetrical loads. Once secured to your trailer, the ratchet handle makes tightening the excess webbing a cinch. Sturdy hook paired with durable polyester webbing, this strap makes a tough and mighty cargo buddy, a must-have for transporting big loads.
Easy-to-use
Transport your load with ease with these versatile wire hook ratchet straps. Always visible in various bright colors, all straps meet DOT regulations and WSTDA-recommended standards, for safe and confident adventures. Latch the hooks onto various anchor points, like D-rings and tie-down plates, to the rub rail of your flatbed trailer, or directly onto your load. With the hook tip attached to the strap at a 90-degree angle, it’s easy to find a point of securement on your load, without having to twist or maneuver the straps for attachment. Secure your load and hit the road in a matter of minutes. It’s almost too easy.
UnshakableTM and Unbreakable
Safely secure your gear to your flatbed trailer using sturdy wire hook straps with ratchet handles. With your gear firmly attached to your rear, you’re free to petal to the metal.
How To Use This Tie-Down Ratcheting Cargo Strap
- Open The Ratchet By Pressing The Lever On The Handle and lifting the handle.
- Slide the loose strap end through the bar on the handle and fold it over.
- Insert the double J-hook end fittings into cargo tie-down anchors.
- Pull the slack strap all the way through and pump the ratchet to tighten the strap as much as possible.
- Use a V board if you need to protect your cargo or to cushion your strap from a sharp-ended load.
- Close the ratchet all the way to lock it in place.
California Residents: WARNING
